07201659 Permit File
CITY,OF DUBLIN Office
i`1Bn of Building Standards • 5800 Shier-Rings Road • Dublin, Ohio 43016
Phone: (614) 410-4670 • Inspection Line: (614) 410-4680
NOV 3 0 2007 WTFD: (614) 652-3920
,01,)ING DIVISION FIRE PROTECTION PERMIT APPLICATION
4 Y OF DUBLIN s7
Application Date) Bldg. App. # ~~7/U~/3 Fire Protection App.
.41 1
PROJECT INFORMATION
Project Address
tit j'10a'&j Project Name
Owner/Tenant Contact Name _ Telephone _
APPLICANT INFORMATION
Fire Protec io Contractor 4
Address f' Telephone - -6 -
State Certificate Number 1 U J q Dublin Registration NumberO
Installer Name' ! cf ''t State Certificate Number
SCOPE OF WORK
(Mark One) New Replace Repair Alteration
FIRE DETECTION AND ALARM SYSTEM (Number of Each
Detectors Strobes Horn k Fire Alarm Boxes Other
SUPPRESSION SYSTEM (Number of Each)
Standpipes On Site Water Piping Sprinkler Heads Limited Area Other
FEES
FIRE DETECTION OR SUPPRESSION PERMIT PROCESSING FEE $60.00
LOW VOLTAGE PERMIT (DETECTION ONLY) $30.00 Minimum fee
plus $20.00 each 1,000 sq ft or fraction thereof over 1,000 sq ft
OUTSIDE PLAN REVIEW SERVICES (EXAMINER'S FEE AS CHARGED)
STATE SURCHARGE (3%)
TOTAL FEE DUE
This permit is granted on the express condition that said work shall in all respects, conform to the ordinances of
the City of Dublin and all laws of the State of Ohio regulating construction, installation, repair and alteration,
and may be revoked at any time upon violation of any provisions of said laws. This permit conveys no right to
open any street, alley or sidewalk or any paFt thereof, nor to make annnection to a water main.
Signature of Licensed Contractor _ DATE
Print Name(, DATE
FOR OFFICIAL USE ONLY
Review Comments: YY' 7,4"e ~ GI dr s~ n4/ i7 s s~P e~X~Pns~on q~r9uirs~ /nPefs
W wiyz Ai T°w4shi o Aire
Fire Department: Date: 4<7
Plans Examiner: Date: Issued by CBO: Date:
CITY 'OF DUBLIN
Building Standards • 5800 Shier-Rings Road • Dublin, Ohio 43016
Phone: (614) 410-4670 • Inspection Line: (614) 410-4680
Application Number . . . . . 07-00201659 Date 12/10/07
Property Address . . . . . . 5151 PAUL G. BLAZER MEMORIAL PKY
Parcel Number: 273-000424
Alternate Address: PARKWAY PRO PLAZA
Tenant nbr, name . . . . . . MEDCO DETECTION
Application type description FIRE PROTECTION
Property owner . . . . . . . DELPHINEUS ASSOCIATES LLC
Contractor . . . . . . . . .
Permit . . . . . . FIRE DETECTION PERMIT
Additional desc . .
Permit Fee . . . . 60.00 Plan Check Fee .00
Issue Date . . . . Valuation . . . . 0
Qty Unit Charge Per Extension
BASE FEE 60.00
Special Notes and Comments
CONTACT WASHINGTON TOWNSHIP FIRE
PREVENTION FOR INSPECTIONS AT 766-0857
Other Fees . . . . . . . . . SURCHARGE FEE - FIRE 1.80
Fee summary Charged Paid Credited Due
Permit Fee Total 60.00 .00 .00 60.00
Plan Check Total .00 .00 .00 .00
Other Fee Total 1.80 .00 .00 1.80
Grand Total 61.80 .00 .00 61.80
This permit is granted on the express condition that said work shall in all respects,
conform to the ordinances of the City of Dublin and all laws of the State of Ohio
regulating construction, installation, repair and alteration and may be revoked at
any time upon violation of any provisions of law.
RECEIVED
A 3 0 2007
COOPER Wheelock
IAAG DIVISION
;7 --Y F DUBLIN
Series NS Horn Strobes and Series NH Horns
r
l
Series NS Series NH
Description: Features:
The Series NS Horn Strobe Appliances are designed for indoor, Approvals include: UL Standard 1971, UL Standard 464,
wall and ceiling mount applications. New York City (MEA), California State Fire Marshal (CSFM),
The Series NH Horn and the horn portion of the Series NS include Factory Mutual (FM) and Chicago (BFP). See approvals by
a selectable continuous horn tone or temporal pattern (Code 3) with model number in Specifications and Ordering Information
selectable dBA settings of 90 or 95 dBA. ADA/NFPA/UFC/ANSI compliant
Strobe options include 1575cd or the Wheelock patented Complies with OSHA 29, Part 1910.165
Multi-Candela strobe with field selectable candela settings of Wall mount model Field Selectable Candela Setting
15/30/75/110cd for wall mount and 15/30/75/95cd and 115/177cd 15/30/75/110cd (24 VDC Multi-Candela models) or 1575cd in
for ceiling mount. 12 or 24 VDC
These versatile Horn Strobe Appliances can be synchronized using Ceiling mount model Field Selectable Candela Setting
the Wheelock SM, DSM Sync Modules or the PS-24-8MC Power 15/30/75/95cd and 115/177cd (24 VDC Multi-Candela
Supply with the Wheelock patented Sync Protocol. Additionally, the models)
audible may be silenced while maintaining strobe activation.
All models of the Series NS and NH are designed for maximum Selectable Continuous Horn or Temporal (Code 3)
performance, reliability and cost-effectiveness while meeting or 2 Selectable dBA settings of 90 and 95 dBA in both tones
exceeding the latest requirements of NFPA72/ANSI 117.1/UFC and Patented Universal Mounting Plate
UL Standards 1971 and 464 as well as meeting ADA requirements
concerning photosensitive epilepsy. 12 and 24 VDC models with UL "Regulated Voltage" using
filtered DC or unfiltered VRMS input voltage
The Wheelock patented 2-Wire Series NS Horn Strobes and
Series NH Horns offer more features with lower current draw than Wall and Ceiling Mount
competitors. Ceiling models with same look as Wheelock round ceiling
strobes and speakers
• NH horn is selectable 12 or 24 VDC in 1 appliance
• The strobes can be synchronized using the Wheelock sync
modules or power supplies with built in Sync Protocol
• Fast installation with IN/OUT screw terminals using
#18 AWG wires
r
FM
®
MCA APPROVED
E5946 151-92-E 7125-0785 142
55391
F
NOTE: All CAUTIONS and WARNINGS are identified by the symbol 1?, All warnings are printed in hold capital letters.
Ail, WARNING: PLEASE READ THESE SPECIFICATIONS AND ASSOCIATED INSTALLATION INSTRUCTIONS CAREFULLY BEFORE USING. SPECIFYING
OR APPLYING THIS PRODUCT. VISIT WWW.000PERWHEELOCK.COM OR CONTACT COOPER VdHEELOCK FOR THE CURRENT INSTALLATION
INSTRUCTIONS. FAILURE TO COMPLY WITH ANY OF THESE INSTRUCTIONS. CAUTIONS OR WARNINGS COULD RESULT IN IMPRnPFR APPLICATION.
INSTALLATION AND/OR OPERATION OF THESE PRODUCTS IN AN EMERGENCY SITUATION. WHICH COULD RESULT IN PROPERTY DAra1AGE. AND
SERIOUS INJURY OR DEATH TO YOU AND/OR OTHERS.
General Notes:
Strobes are designed to flash at 1 flash per second minimurn over their "Regulated Voltage Range'. Note that NFPA-72 specifies a flash rate
of 1 to 2 flashes per second and ADA Guidelines specify a flash rate of 1 to 3 flashes per second.
All candela ratings represent minimum effective Strobe intensity based on UL Standard 1971.
Series NS Strobe products are listed under UL Standard 1971 for indoor use with a temperature range of 32°F to 120"F (0°C to 49'C) and
maximum humidity of 93% 2%).
Series NH horns are listed under UL Standard 464 for audible signal appliances (Indoor use only).
"Regulated Voltage Range" is the newest terminology used by UL to identify the voltage range. Prior to this change UL used the
terminology "Listed Voltage Range".
Table 1: Ratings Per UL Standard 1971 Table 2. dBA Ratings for Series NS/NH Horn
Regulated ,F Reverberan-t--d-BA Anechoic dBA
Input Voltage Strobe Candela I @ 10ft per UL 4.1 @ 10 ft
Model voltage e Range (CD) Description Volume f -
12 ~24 12 24
VDC/FWR VDC VDC VDC VDC
NS-24MCW 24 T 16.0-33.0 15/30/75/110 Continuous High 83 87 89 95
NS-241575W 24 16.0-33.0 15 (75 on Axis) Horn Low 76 81 84 90
NS-121575W ' 12 j 8.0 - 17.5 15 (75 on Axis) High 79 82 89 95
Code 3 _
NS-24MCC 24 16.0 - 33.0 15/30/75/95 Horn Low 72 76 84 90
NS-24MCCH 24 6.0-33.0 115/177
able UL Max Current-
Audible Wall Mount Strobe Models Ceiling Mount Strobe Models
4 VDC
FHigh(95) es NS/NH NH-12/24 NS-241576W NS-24MCW NS-24MCC NS-24MCCH
@24VDC 15/75cd 15cd 30cd 75cd 110cd 15cd 30cd 75cd 95cd 115cd 177cd
dBA 24VDC 0.044 0.104 0.074 0.107 0.184 0.244 0.082 0.124 0.209 0.275 0.350 0.4771
Low (90) dBA 24VDC 0.018 0.096 0.066 0.101 0.177 0.232 0.071 0.114 0.201 0.261 0.306 0.42
Audible Wall Mount RMS current ratings are per UL average RMS method. UL
Series NS/NH NH-12/24 Aud/Strobe max current rating is the maximum RMS current within the listed
12VDC voltage range (16-33v for 24v units). For strobes the UL max
@12V NS-121575W current is usually at the minimum listed voltage (16v for 24v
J units). For audibles the max current is usually at the maximum
High (89) dBA 12 VDC 0.021 0.220 listed voltage (33v for 24v units). For unfiltered FWR ratings,
Low (84) dBA 12VDC 0.012 0.210 see installation instructions.
Wiring Diagrams'
NS/NH APPLIANCE NS AND NH APPLIANCES SYNCHRONIZED WITH SM MODULE
SINGLE CLASS "B" NAC CIRCUIT WITH AUDIBLE SILENCE
FEATURE SM
CC EC1NG
APPLIANCF.SP1'DShnl. JF~ EOLR P
FS-12x'24-8MP, ( 1 var
PS-12124-8CP CR
~ f
FACP - C *na~i~i
P rrn r:
SIGNAL
NS AND NH APPLIANCES SYNCHRONIZED WITH DSM MODULE DUAL NOTE: NS/NH must be set on Code 3 horn tone
CLASS "A" NAC CIRCUIT WITH NO AUDIBLE SILENCE FEATURE to achieve synchronized temporal (Code 3) tone.
a DJL= Refer to installation instruction (P83983, P83600
respectively).
For detail using SM or DSM Sync Module refer
to Data Sheet S3000 or Installation Instructions
+ P83123 for SM and P83177 for DSM. For
wiring information on the power supplies refer t
Installation Instructions P84662 for PS-24-8MC.
P
_.-GUIs -TURN
SPECIFICATION & ORDERING INFORMATION
Order Strobe Sync w/ SM, 24 12 Agency Approvals
Model Number Code Candela DSM or VDC VDC Mounting Options#
PS-24-81VIC UL MEA CSFM FM BFP
NS-24MCW-FR 9404 15/30/75/110 X X B,D,E,F,G,H,J,N,O,R,X X X X X X
NS-24MCW-FW 9405 15/30/75/110 X X B,D,E,F,G,H,J,N,O,R,X X X X X X
NS-241575W-FR 7806 15 (75 on Axis) X X B,D,E,F,G,H,J,N,O,R,X X X X X X
NS-241575W-FW 7811 15 (75 on Axis) X X B,D,E,F,G,H,J,N,O,R,X X X X X X
NS-121575W-FR 7816 15 (75 on Axis) X X B,D,E,F,G,H,J,N,O,R,X X X X X X
NS-121575W-FW 7818 15 (75 on Axis) X X B,D,E,F,G,H,J,N,O,R,X X X X X X
NH-12/24-R 7449 X X X B,D,E,F,G,H,J,N,O,R,X X X X X X
NH-12/24-VV 7500 X X X B,D,E,F,G,H,J,N,O,R,X X X X X X
NS-24MCC-FR 3754 15/30/75/:,:, X X E X X X
NS-24MCC-FW 3753 15/30/75/95 X X E X * X X
NS-24MCCH-FR 3756 115/177 X X E X * X X j
NS-24MCCH-FW 3755 115/177 X X E X X X
NH-12/24R-R 3752 - X X B,D,E,F,G,H,J,N,O.R,X X X X
- - 1
NH-12124R-W 3751 X 1 X B,D,E,F,G,H,J,N,O.R,X X X X
NS and NH Ceiling Mount Appliances will be available July 2006. *Pending
Note: Models are available in Red or White. Contact Customer Service for Order Code and Delivery.
#Refer to Data Sheet S7000 for Mounting Options
NOTE: Due to continuous development of our products, specifications and offerings are subject to change without notice in accordance
with Wheelock Inc. standard terms and conditions.
1
4
ARCHITECTS AND ENGINEERS SPECIFICATIONS
The audible/visual notification appliances shall J~e lack Series NS ll :n NH H i appliances of
approved equals. The Series NS appliances shall meet and be listed for UL , Emergency Devices for the Hearing-
Impaired for Indocr Fire Prciection Sei.ir , Th S,_-i es NH Her ~hcdl b UL i_ir;L-, ;Fir. Prct- ; ignaling
The horn strobe shall be listed for indoor use and shall meet the requirements of FCC Part 15 Class B. All inputs shall be compatible
with standard reverse polarity supervision of circuit wiring by the Fire Alarm Control Panel (FACP).
The audible portion of the appliance shall have a minimum of two (2) field selectable settings for dBA levels (90 and 95 dBA) and shall
have a choice of continuous or temporal (Code 3) audible outputs.
The strobe portion of the appliance shall produce a flash rate of one (1) flash per second over the Regulated Voltage Range and shall
incorporate a Xenon flashtube enclosed in a rugged Lexan lens. The Series NS shall be of low current design. Where wall mount,
Multi-Candela appliances are specified, the strobe intensity shall have field selectable settings and shall be rated per UL Standard 1971
for 15/30/75/110 candela. Where ceiling mount, Multi-Candela appliances are specified, the strobe intensity shall have field selectable
settings and shall be rated per UL Standard 1971 for 15/30/75/95 candela or 115/177 candela. The selector switch for selecting the
candela setting shall be tamper resistant. The 1575 candela strobe shall be specified when 15 candela UL Standard 1971 Listing with
75 candela on-axis is required (e.g. ADA compliance).
When synchronization is required, the appliance shall be compatible with the Wheelock SM, DSM Sync Modules or the Wheelock PS-24-
8MC Power Supplies with built-in Patented Sync Protocol. The strobes shall not drift out of synchronization at any time during operation.
If the sync module or Power Supply fails to operate, (i.e., contacts remain closed), the strobes shall revert to a non-synchronized flash-
rate. The appliance shall also be designed so that the audible signal may be silenced while maintaining strobe activation.
The Series NS Horn Strobes and NH horn shall incorporate a Patented Universal Mounting Plate that shall allow mounting to a single-
double- 4-inch square, 100mm European type hackhoxes. or the SHBB Surface Backbox. If required. an NATP /Notification
Appliance Trimplate) shall be provided.
All notification appliances shall be backward compatible.
wYiirk
273 Branchport Avenue A
Long Branch, NJ 07740
Phone: (800) 631-2148 WE ENCOURAGE AND SUPPORT NICET CERTIFICATION
Fax: (732) 222-2588 3 YEAR WARRANTY
www.cooperwheelock.com Made in USA
S2100 NS/NH 10/06
_h
A #1oc
Series RSS and RSSP Strobes and Strobe Plates
Series RSS Series RSS Series RSSWP RSS Round
Description Features
The Wheelock patented Series RSS Strobe Appliances and Approvals include: UL Standard 1971, New York City (M EA),
Series RSSP Strobe Plates have lower current draw while California State Fire Marshal (CSFM), Factory Mutual (FM), and
maintaining outstanding performance, reliability and cost Chicago (BFP) See approvals by model in Specifications and
effectiveness. These versatile appliances will satisfy virtually all Ordering Information
requirements for indoor, wall or ceiling mount applications. ADA/NFPA/UFC/ANSI compliant. Meets OSHA 29 Part
Strobe options for wall mount models include 1575 or the 1910.165
Wheelock Patented MCW multi-candela strobe with field Wall mount Multi-Candela models are available with Field
selectable candela settings of 15/30/75/110cd or the high Selectable Candela Settings of 15/30/ 75/110cd or 135/185cd.
intensity MCWH strobe with field selectable 135/185cd. Single Candela models are available in 1575cd
Ceiling mount models include the patented MCC multi-candela Ceiling mount Multi-Candela models are
ceiling strobe with field selectable intensities of 15/30/75/95cd
or the high intensity MCCH strobe with field selectable available with field selectable candela settings of 15/30/75/95cd
115/177cd. or 115/177cd. (Round or Square)
All models may be synchronized using the Wheelock SM, Strobes produce 1 flash per second over the
DSM Sync Modules or the PS-24-8MC Power Supplies with regulated voltage range
the Wheelock Patented Sync Protocol. Synchronized strobes
can eliminate possible restrictions on the number of strobes 12 and 24 VDC models with wide UL "Regulated Voltage" us-
in the field of view. Wheelock's synchronized strobes offer an ing filtered (DC) or unfiltered VRMS input voltage
easy way to comply with ADA recommendations concerning Synchronize using the Wheelock sync modules or power sup-
photosensitive epilepsy as well as meeting the requirements plies with built-in sync protocol
of NFPA 72.
• Fast installation with IN/OUT screw terminals using #12 to #18
The Wheelock Series RSS Strobes employ a Patented Integral AWG wire
Strobe Mounting Plate that can be mounted to a single gang,
double gang, 4" square, 100mm European backboxes or the
SHBB surface backbox. If the flush backbox has side or top
space between it and the finished wall, the NATP (Notification For Weatherproof Series RSS See Datatsheet S9004
Appliance Trimplate) may be used. It provides an additional.65"
of trim for the Appliance. An attractive cover plate is provided
for a clean, finished appearance on all models.
The Series RSSP Multi-Candela Strobe Plates are a cost
effective way to retrofit required wall strobe appliances to
bells, horns, chimes multitones or speakers and easily mounts
to standard 4" backboxes or for surface mount use with the
Wheelock SBL2 surface backbox.
NIEA APPROVED
55391 151-92-F 7L5-0785141
7s00-0785:154
z
_ Lrlnta:! ii; P~old c rriL~' Iet[cr.
Jl WARNING: PLEASE READ THESE SPECIFICATIONS AND D I N INSTALLATION INSTRUCTIONS CAREFULLY BEFORE USING. SPECIFYING OR
APPLYING THIS PRODUCT VISIT wwVV.000PERLVHEFI_OCK.COP:1 OR CONTACT COOPER VVHEELOCK FOR THE CURRENT INSTALLATION INSTRUCTIONS.
FAILURE TO COMPLY WITH ANY OF THESE INSTRUCTICNS. CP,UTIONS OR WARNINGS COULE RESULT IN IMPROPER APPLICATION. INSTALLATION AND/OR
OPERATION OF THESE PRODUCTS IN AN EMERGENC', SI T UAl]ON. WHICH COULD RESULT IN PROPERTY DAMAGE, AND SERIOUS INJURY OR DEATH TO YOU
AND/OR OTHERS.
General Notes:
Strobes ;.Ire esig to flash at 1 flash f el ni:r;::!lu'" over their Regulated Voltage Range". Note that NFPA c p- re r-_.: lash ate of
to 2 flashes per second and ADA Guidelines spediy a flash rate of 1 to 3 flashes per second.
A.II candela ratings represent mininWIn effectiVe Stroke Intensity based on UL Standard 1971.
Series NS Strobe products are listed under UL Standard 1971 for indoor use with a temperature range of 32'F to 120F (0'C to 49°C) and
maximum humidity of 93% 2%),
Series NH horns are listed under UL Standard 464 for audible signal appliances (Indoor use only).
"Regulated Voltage Range" is the newest terminology used by UL to identify the voltage range. Prior to this change CI_ used the
terminology "Listed Voltage Range".
Table 1: Average RMS Current"
RSS/RSSP - Wall Mount Ceiling Mount
RSS/RSSP 241575W 24MCW 24MCWH 24MCC 24MCCH
24VDC
Models - _T - E75cd -
1575cd 15cd 30cd 75cd 110cd 135cd 185cd 15cdt 30cd 9115cd 177cd
- -
r
UL max' u.090 0.060 U.U92 Q165 0.220 0.300 0.420 0-065 0.105 0.189 0.249 0.300 0.420
RSS/RSSP RSS/RSSP
24VDC Wall Mount
RMS current ratings are per UL average RMS me`thcod. UL max current
Models 121575W rating is the maximum RMS current within the listed voltage range (16-33v
for 24v units). For strobes the UL max current is usually at the minimum
12 vdc 0.152 _ listed voltage (16v for 24v units). For audibles the max current is usually at
UL max' 0.255 the maximum listed voltage (33v for 24v units). For unfiltered FWR ratings,
see installation instructions.
Table 2: Audibles/Speakers for RSSP Strobe Plate
Product Series
Multitone Appliances AMT, MT Wiring Diagrams #
- SERIES RSS/RSSP APPLIANCE
Horns AH, NH, HS
Motor Bells MB-G6/G10
FROM; TO Ids T
Speakers ET-1010/1080, E70, ET70 PRECEDING +tt _
NC E---
APPLIANCE, SYNC rF E I,RI
Chimes CH70 MODULE, POWER
SUPPLY OR FRCP
+11
SERIES RSS/RSSP APPLIANCES SYNCHRONIZED
WITH DSM MODULE SINGLE CLASS "A" NAC CIRCUIT SERIES RSS/RSSP APPLIANCES SYNCHRONIZED
WITH MULTIPLE DSM MODULES
i DSM #17
L)ry~;~ '
~ - Syncl.:
m +a S -
Fr
D M # 2
Ar
R s I
FACP. 0 Cr -!l
M #3
Kss f i ~cl
-.ce f~ _ _rtl
DSM Inte _=sting wiring shown. _3 -nan: ofi_I
`wenty (20)'J
'Tr E PLATE ASSEMBLY XED Vr'ITfi
SERIES SRSS?APPLIANCE
SM MODULE SINGLE CLASS "B" NAC CIRCUIT
i
L
1
STROBE/PLATE ASSEMBLY SERIES RSS/RSSP APPLIANCES SYNCHRONIZED
AUDIBLE & VISIBLE APPLIANCE OPERATE INDEPENDENTLY WITH PS-12/24-8CP or PS-12/24-8MP
f - +
F' - - F
n1[--- -
+ :1m P
" For detail using SM or DSM Sync Module refer to Data
Sheet S3000 or Installation Instructions P83123 for SM
and P83177 for DSM. For wiring information on the power
supplies refer to Installation Instructions P84515 for PS-
12/24-8CP and P84333 for PS-12/24-8MP.
Specifications and Ordering Information
Square Agency Approvals
Order Wall Ceiling Non- Strobe 24 12 Color Color
Model Code Mount Mount Sync Candela VDC VDC RED WHITE ] Mounting Options*** Round UL I MEA CSFM FM BFP
RSS 24MCW FR 940 X X 15/30/75/110 X X ~B,D,E,F,G,H,J,N,O,R,X Square X X X X X
RSS-24MCW-FW 9401 X X 15/30/75/110 X XB,B,D,E,F,G,H,J,N,O,R,X Square X X X X X
RSS-241575W-FR 7471 X X 15 (75 on Axis) X X B,D,E,F,G,H,J,N,O,R,X Square X X X X X
RSS-241575W FW 7788 X X 15 (75 on Axis) X X B.D,E,F,G,H,J,N,O,R,X Square X X X X X
RSS-121575W-FR 7476 X X 15 (75 on Axis) X X I B,D,E,F,G,H,J,N,O,R,X Square X-11 X X X X
RSS-121575W-FW 7468 X X 15 (75 on Axis) X X j B, D, E,F,G,H,J,N,O,R,X Square X! X X X X
RSS-24MCC-FW 3158 X X 15/30/75/95 X X B,D,E,F,G,H,J,N,O,R,X Square X X X X
RSS-24MCC-FR 3157 X X 15/30/75/95 X X - B,D,E,F,G,H,J,N,O,R,X Square X X X X
RSS-24MCCR-FW 3160 X X 15/30175/95 X X B,D,E,F,G,H,J,N,O,R,X Round X X X X
RSS-24MCCH-FW 3461 X X 115/177 X X~B,D,E,F,G,H,J,N,O,R,X Square X X X X
RSS-24MCCHR-FW 3463 X X 115/177 X X B,D,E,F,G,H,J,N,O,R,X Round X X F-
3465 X X 135/185 X X B.D,E,F,G,H,J,N,O,R,X Square X I X X,,
RSS-24MCWH-FR X
- --r -
RSS-24MCWH-FW 3464 X X 135/185 X X B D,EF,G,H,J,N,O,R,X Square X X X X
80@ 77'F
RSSWP-2475W-FR*' 9013 X X 5@ 31"F X X X B.U.E,F,G,H,J,N,O,R,X Square X X j X X
RSSWP-2475W FW- 3034 X X 75@ 3 °F X X X B.D E,F,G,H,J,N,O,R,X Square X X X X
T-
RSSP-121575W FR 17798 I X X 15 ,75 on Axis) X X D,E,Z Square X y X ,i X X X
RSSP-24MCW FR 9402 1- X X 15130/75/110 X X D,E,Z Square X X X X X
RSSP-241575W FR 7793 X X 1; 75 on Axis) X D,E,Z Square X X fi X X X
- - ---1 _
`PENDING
All models sync with Wheelock SM, DSM or PS-12/24-8CP or PS-12124-8MP.
# Models are available in either Red or White. Call Customer Service for Order Code & Delivery.
**For Weatherproof Series RSS Strobe specifications see data sheet S9004.
***Refer to data sheet S7000 for mounting options.
-4 -1
i
t pie tar,.
Strobe Plates are to be installed, they shall be the Wheelock Series RSSP Strobe Plate and shall have the same electronic circuitry
as the Wheelock Series RSS.
The Series RSS Strobe shall be of low current Cesigh. 'vVheie Multi-Candela appli rces are specified, the strobe p itv shall have
field selectable settings and shall be rated per UL Standard 1971 at 15/30/75/1 ICcd or 135/185cd for wall mOUnt and 15/30i75r95cd or
115/177cd for ceiling mount. The selector switch for selecting the candela shall be tamper resistant. The 1575 candela strobe shall be
specified when 15 candela UL Standard 1971 Listing with 75 candela on axis is required (e.g. ADA compliance),
VVIlen synchronization is required, the appliance shall be compatible with Wheelock 's SM, DSM Sync Modules or the WY eelock PS-24-
8MC Power Supplies with built-in Patented Sync Protocol. The strobes shall not drift out of synchronization at any time during operation.
If the sync module or Power Supply fails to operate, (i.e.. contacts remain closed), the strobe shall revert to a non-synchronized flash
rate. The strobes shall be designed for indoor surface of flush mounting.
The Series RSS Strobe Appliances shall incorporate a Patented, Integral Strobe Mounting Plate that shall allow mounting to single-
gang, double-gang, 4-inch square, 100mm European type backboxes, or the SHBB Surface Backbox. If required, an NATP (Notification
Appliance Trimplate) shall be provided. An attaching cover plate shall be provided to give the Appliance and attractive appearance. The
Appliance shall not have any mounting holes or screw heads visible when the installation is completed.
The Series RSSP Multi-Candela orsingle candela Strobe Plate shall mount to either a standard 4 inch square backbox forflush mounting,
or the Wheelock SBL2 backbox for surface mounting.
Le 11
NOTE' Due to continuous development of our products, specifications and offerings are subject to change without notice in accordance with Wheelock, Inc. standard teens and conditions.
i ~
00
COOPER Wheelock
273 Branchport Avenue _ W
Long Branch, NJ 07740
Phone: (800) 631-2148 WE ENCOURAGE AND SUPPORT NICET CERTIFICATION
Fax: (732) 222-2588 3 YEAR WARRANTY
www.cooperwheelock.com Made in USA
S0410 RSS/RSSP 07/07